Description
About this item
- 【15 FT REACH – BOTH FEET ON THE GROUND】The pole extends to 9.74 ft; held at shoulder level the cutting head reaches about 15 ft: the top of a 9-12 ft hedge, a limb over the driveway or a branch behind the fence line is cut from the lawn. Three twist-lock sections hold without sag once the head is loaded, so the last two feet no longer mean balancing on a ladder.
- 【2-IN-1: POLE SAW + HEDGE TRIMMER】An 8 in chain saw head for the limbs a hedge blade cannot take, and a 17 in dual-action blade for hedges up to 0.8 in. Release one collar, swap the head, tighten by hand: no tools, no loose screws lost in the grass. One pole replaces the two machines and the two chargers you would otherwise store.
- 【180 DEGREE HANDLE + 150 DEGREE HEAD, 11 STOPS】The rear handle turns 180 degrees, the hedge head rotates 150 degrees across 11 positive stops, and the saw head locks at 4 cutting angles. Set the head to the surface instead of bending your wrist: flat tops, straight sides, angled faces and overhead limbs, with less shoulder strain on long jobs.
- 【2 x 4.0Ah – DOUBLE THE RUNTIME】Two 4.0Ah packs and a charger are included, so runtime is not capped by a single battery. A charged pair runs about 90 minutes of cutting, and a full charge takes under 2 hours, so the second pack is already ready when the first one drops. Both packs also fit the rest of the SOARFLY 20V line, so a second tool does not mean a second battery platform.
- 【17 IN 65Mn BLADE, CUTS CLEAN AND STEADY】The 17 in dual-action 65Mn steel blade slices branches up to 0.8 in (2 cm), and its two opposed edges cancel most of the kickback and vibration, so the pole stays steady at full extension. A hardened edge keeps its bite through a season of hedges, while the padded shoulder strap carries the load during long overhead passes, not your forearms.

